OBD2 Car ScannerWhat does U0544 mean?
U0544 stands for Invalid Data Received From Parking Assist Control Module B. Two or more of the car's computer modules are not communicating properly over the vehicle network (CAN bus).
Network codes cover the communication between the car's computer modules. When the car's computer sees a reading outside its normal range, it stores this code and may turn on a warning light on the dashboard.
Common causes
- Low or weak battery
- Damaged network wiring or connector
- A module that has lost power or failed
- Aftermarket accessories interfering with the network
What to do
- Read all stored and pending codes with a scanner. Several codes together often point to one cause.
- Note the freeze frame data (speed, temperature, load) recorded when the code was set.
- Inspect the wiring and connectors of the part named in the code for damage, corrosion or looseness.
- Fix the most likely and cheapest cause first, then clear the code and drive to see if it comes back.
Read this code from your own car
Plug in a cheap ELM327 adapter and the app shows every fault code, what it means and how to fix it.
Frequently asked questions
What does U0544 mean?
U0544 means “Invalid Data Received From Parking Assist Control Module B”. It belongs to the network communication group: Two or more of the car's computer modules are not communicating properly over the vehicle network (CAN bus).
Is it safe to drive with U0544?
You can usually drive carefully for a short time, but fix it soon to avoid further damage or higher fuel use.
How do I clear U0544?
Fix the cause, then clear the code with an OBD2 scanner or app. If the fault is still there, the code will come back.
Related codes
- U053AInvalid Data Received From Entrapment Control Module A
- U0541Invalid Data Received From Entrapment Control Module B
- U0542Invalid Data Received From Headlamp Control Module A
- U0543Invalid Data Received From Headlamp Control Module B
- U0545Invalid Data Received From Running Board Control Module
- U0546Invalid Data Received From Entertainment Control Module Front
- U0547Invalid Data Received From Seat Control Module E
- U0548Invalid Data Received From Seat Control Module F
Code meanings can vary by manufacturer. This page is general guidance, not a repair manual. Always confirm the cause before replacing parts.