OBD2 Car ScannerWhat does P06CE mean?
P06CE stands for Cylinder 10 Glow Plug Incorrect. The engine computer has found a fault in one of its own circuits or in a circuit it controls.
Powertrain codes cover the engine, transmission and emissions. When the car's computer sees a reading outside its normal range, it stores this code and may turn on a warning light on the dashboard.
Common causes
- Damaged wiring or a loose connector
- Low battery voltage or poor ground
- Faulty relay or actuator
- In rare cases, a faulty engine control module
What to do
- Read all stored and pending codes with a scanner. Several codes together often point to one cause.
- Note the freeze frame data (speed, temperature, load) recorded when the code was set.
- Inspect the wiring and connectors of the part named in the code for damage, corrosion or looseness.
- Fix the most likely and cheapest cause first, then clear the code and drive to see if it comes back.
Read this code from your own car
Plug in a cheap ELM327 adapter and the app shows every fault code, what it means and how to fix it.
Frequently asked questions
What does P06CE mean?
P06CE means “Cylinder 10 Glow Plug Incorrect”. It belongs to the computer and output circuits group: The engine computer has found a fault in one of its own circuits or in a circuit it controls.
Is it safe to drive with P06CE?
You can usually drive carefully for a short time, but fix it soon to avoid further damage or higher fuel use.
How do I clear P06CE?
Fix the cause, then clear the code with an OBD2 scanner or app. If the fault is still there, the code will come back.
Related codes
- P06CACylinder 6 Glow Plug Incorrect
- P06CBCylinder 7 Glow Plug Incorrect
- P06CCCylinder 8 Glow Plug Incorrect
- P06CDCylinder 9 Glow Plug Incorrect
- P06CFCylinder 11 Glow Plug Incorrect
- P06D0Cylinder 12 Glow Plug Incorrect
- P06D1Internal Control Module Ignition Coil Control Performance
- P0700Transmission Control System Malfunction
Code meanings can vary by manufacturer. This page is general guidance, not a repair manual. Always confirm the cause before replacing parts.